Blum Hinges: Which One Does Each Cupboard Door Need?
Most cupboard doors in a kitchen are ordinary: 18mm thick, sitting over the cabinet, opening to a comfortable angle. For those, almost any good concealed hinge will do. The trouble starts with the doors that are not ordinary: the corner cupboard with a carousel inside, the larder with internal drawers, the chunky solid timber door, the handleless run with nothing to pull. Those are the doors where the hinge decides whether the cupboard works at all, and they are where Blum hinges earn their reputation. This guide goes door by door, so you can match each awkward cupboard to the right Blum hinge before you order.
What Sets a Blum Hinge Apart
Blum is an Austrian fittings maker, and its hinges are widely used in fitted kitchens. Three features run through the range we stock.
CLIP top fitting. The hinge screws to the door and clips onto a mounting plate screwed to the cabinet. To take a door off for painting or cleaning, you release the clip and lift it away; to refit it, you clip it back on and it returns to exactly the same position.
Built-in Blumotion. On most of the range, the soft close damper sits inside the hinge itself, so there is no separate buffer to fit, adjust or knock out of place.
Three-way adjustment. Every hinge adjusts for depth (+3mm/-2mm), height (±3mm) and side position (±2mm), so gaps can be lined up after the doors are hung.
Our Blum hinges also come as complete packs. Each one holds two hinges, two mounting plates, the screws and, on most packs, covers for the hinge arms, so one pack hangs one door with nothing else to buy. The bi-fold pack is the exception, as it joins the two leaves of a folding door.
Quick Guide: Match the Door to the Hinge
| The door | Blum hinge | Opening | Door thickness |
|---|---|---|---|
| Standard kitchen or bedroom door | 110° Blumotion soft close | 110° | 16mm to 26mm |
| Thick, heavy or profiled door | 95° thick door, soft close | 95° | 16mm to 32mm |
| Cupboard with internal drawers or pull-outs | 155° zero protrusion, soft close | 155° | 20mm to 31mm |
| Corner or larder needing full access | 170° wide angle, soft close | 170° | Up to 21mm |
| L-shaped corner with a folding door | 60° bi-fold | 60° | 15mm to 23mm |
| Handleless door | 95° TIP-ON push to open | 95° | 16mm to 32mm |
| Handleless door with internal drawers | 155° TIP-ON push to open | 155° | 20mm to 31mm |
Standard Doors: 110° Blumotion Soft Close
For the everyday cupboard, the 110° Blumotion soft close hinges are the default. A 110° opening gives easy access to plates, pans and food, and the built-in damper slows the door so it settles shut without a bang. They take doors from 16mm to 26mm thick, which covers almost every standard kitchen door, and they are overlay hinges, for doors that sit over the front edge of the cabinet.
If you are weighing up whether every door needs soft close at all, our comparison of soft close vs standard hinges covers where each one makes sense.
Thick and Profiled Doors: 95° Thick Door Hinges
A thick door needs more room at the hinge side as it swings. Fit a standard hinge to a heavy solid timber door or a deep profiled front and it can bind, rub the cabinet edge or refuse to close neatly. The 95° thick door hinges are made for exactly that, taking doors from 16mm right up to 32mm thick, with Blumotion soft close built in. A 25mm door sits comfortably in the middle of that range.
The slightly smaller 95° opening is deliberate: it gives a thick door the clearance it needs rather than forcing it wider than it can comfortably go. Both overlay and inset versions are available.
For doors thicker than 32mm, such as a 35mm door, look at a hinge rated for that thickness instead. Our DTC 110° full overlay hinge suits doors from 19mm to 35mm.
Cupboards with Internal Drawers: 155° Zero Protrusion
Here is a problem many people only discover after fitting. On a normal hinge, the edge of an open door still sits slightly inside the cabinet opening. That is fine for shelves, but an internal drawer or pull-out basket will catch on it every time it slides out.
155° zero protrusion soft close hinges solve this by swinging the door completely clear of the opening, so nothing inside meets the door. They suit doors from 20mm to 31mm thick, keep Blumotion soft close built in, and come in overlay and inset versions. They are the hinge to plan for on larder units with internal drawers and on any cupboard fitted with pull-out storage.
Corner Cupboard Hinges: 155° or 170°?
Corner cupboards are deep, and the things stored at the back are the hardest to reach. A wider-opening hinge gets the door out of your way so you can get your arm, or a pull-out corner system, right inside.
Both wide angle options work well as corner cupboard hinges, and the choice comes down to what is inside the cupboard:
- Pull-outs, carousels or internal drawers: choose the 155° zero protrusion hinge, so the door edge stays clear of anything that slides.
- Shelves and bulky items: choose the 170° wide angle hinges, which let the door swing almost flat against the neighbouring unit for completely open access.
One detail to note on the 170° hinge: the soft close comes from two clip-on Blumotion devices supplied in the pack rather than being built into the hinge, and it takes doors up to 21mm thick, which suits most 18mm kitchen doors.
L-Shaped Corners: 60° Bi-Fold Hinges
In an L-shaped corner unit, a single wide door would clash with the door, appliance or wall beside it. The answer is a bi-fold door: two leaves joined together, so the door folds back on itself as it opens. The main hinges on the cabinet carry the whole door, while the 60° bifold cupboard door hinges join the two leaves along the fold.
These are sprung rather than soft close, suit doors from 15mm to 23mm thick, and clip onto their plates with the same three-way adjustment, so the two leaves can be lined up precisely. Remember that they only join the leaves; the cabinet side still needs its own hinges.
Handleless Doors: TIP-ON Push to Open
A handleless door with no J-pull needs another way to open. Blum's TIP-ON system does it mechanically: press the front, and a small opener pushes the door open; push it again to close. Our two push to open packs include the TIP-ON unit and its adapter plates alongside the hinges, so one pack sets up one door.
- 95° push to open hinges for standard and thicker handleless doors from 16mm to 32mm, in overlay or inset.
- 155° TIP-ON push to open hinges for handleless larders and pull-out cupboards, combining push to open with zero protrusion, for doors from 20mm to 31mm.
A common question is whether push to open can be combined with soft close hinges. The hinges in these packs are unsprung on purpose: a sprung, soft close hinge pulls the door shut and works against the opener, while an unsprung hinge lets the door move freely so the push action works smoothly. If you prefer a handleless look that opens by hand instead, our guide to handleless J-pull doors explains the alternative.
Inset Doors: Which Blum Hinges Fit?
An inset door sits inside the cabinet frame rather than over it, and it needs a hinge made for that position. Of our Blum packs, the 155° zero protrusion, the 95° thick door and the 95° push to open hinges all come in an inset version: choose Inset from the options on the product page. The 110°, 170° and 155° TIP-ON packs are overlay only. If you are not sure which your doors are, our guide to measuring cabinet hinge sizes shows how to work out the overlay.
Fitting and Adjusting Blum Clip Top Hinges
Fitting follows the same pattern for every hinge in the range. The hinge cup sits in a 35mm hole drilled into the back of the door, and the mounting plate screws to the inside of the cabinet. Once both are fixed, the hinge arm clips onto the plate from the front. A drilling jig helps you place the cup hole at the same distance from the edge on every door, which keeps the gaps even along a run.
With the doors hung, use the three adjustment screws to line everything up: height first, then side position, then depth. Our step-by-step guide on adjusting a cabinet door hinge in 3 steps takes you through each screw in turn.
Are Blum Hinges Worth It?
For the standard doors in a kitchen, a good budget hinge does the job well, and our DTC hinges are a sensible choice there. Blum comes into its own on the doors covered above: wide angle corners, zero protrusion for internal drawers, thick doors and push to open. These are specialist jobs, and a hinge made for the job is far easier to live with than a standard one that nearly fits.
The complete packs make ordering simpler too. Where many budget hinges sell the hinge and the mounting plate separately, each Blum pack holds everything for one door. For help choosing more generally, see how to choose cabinet hinges properly, browse our full range of hinges, hinge plates and fittings, or call 0161 465 4007 and tell us about your doors.
Frequently Asked Questions
1. Which Blum hinge do I need for a standard kitchen door?
For most standard doors from 16mm to 26mm thick that sit over the cabinet, the 110° Blumotion soft close hinge is the right choice. It opens to 110° and closes the door gently with a damper built into the hinge.
2. How many Blum hinges does a door need?
Most standard cupboard doors need two hinges, which is what each of our Blum packs contains. Tall or heavy doors, such as larder doors, usually need extra hinges along their height.
3. How do you adjust Blum hinges?
Each Blum hinge has three adjustments: height (±3mm), side position (±2mm) and depth (+3mm/-2mm). Work in that order, making small turns and checking the door after each one.
4. Can you use push to open with soft close hinges?
Not usually. A soft close hinge pulls the door shut and works against the push to open unit, so TIP-ON systems use unsprung hinges that let the door move freely.
5. What size hinges do I need for a 35mm thick door?
Our Blum thick door hinges take doors up to 32mm. For a 35mm door, choose a hinge rated to that thickness, such as our DTC 110° full overlay hinge, which suits doors from 19mm to 35mm.
6. Do Blum hinges come with mounting plates?
Yes. Each of our Blum packs includes two hinges, two CLIP mounting plates and the screws, so most packs hang one door with nothing else to buy.
